ASUS ROG-6 Pro
The all-new ASUS ROG-6 PRO
The All-new gaming phone from the most popular gaming device manufacturer brand-- ASUS
released a new phone-- ROG 6 PRO.
18GB LPDDR5 RAM | 512GB UFS 3.1 Storage
- 17.22cm (6.78”) FHD+ (2448 x 1080) AMOLED HDR10+ Display, Delta E<1 Colour accuracy | Refresh Rate – up to 165Hz | Up to 720Hz Touch Sampling Rate | 23ms Touch Latency | Up to 1200 nits' brightness
- Qualcomm Snapdragon 8+ Gen 1 Octa-core processor, 3.2GHz | Adreno 730 GPU | 5G Mobile Platform | ROG Game Cool 6 Cooling
- Rear Cameras – 50MP Sony IMX766, 13MP Wide-angle, 5MP Macro | Front Camera – 12MP Sony IMX663 | Triple Microphones
- Android™ 12 with ROG UI and Classic UI | Armory Crate & Game Genie
- 6000mAh Split battery | 2 x USB-C Charging Port (Side port with Display-out support) | Up to 65W Hypercharge support | 30W Hypercharge adapter included in-box.
- ROG Air Trigger 6 Ultrasonic buttons + 10 Motion control gestures
- ROG Vision – Customizable Rear Color PMOLED Display
The device has been tested for water resistance using the IEC 60529 standard and has achieved an IPX4 rating. IPX4 resistance protects against splashing water. Water splashed against the enclosure from any direction will have no harmful effects. (https://www.iec.ch/ip-ratings)
The water repellency may deteriorate over time under normal conditions of use, or if the unit is damaged, repaired or disassembled or not observe the correct precautions. The IPX4 water-repellent function of this device is only suitable for general tap water or freshwater, and not for contact with other types of water or liquids (e.g., seawater, salt water, chlorinated water and beverages). In addition, do not immerse the unit in any water or liquid, and please note that this device has a USB-C® charging port, and the USB-C® port must be thoroughly dried before charging. Note: The water repellency of this device is tested by using a flow rate of 0.1 l/min per hole (the number of holes depends on the size of the swing tube), a water spray angle of ±180° and a pressure of 80~100 kPa; the device is rotated 90° horizontally after 5 minutes, and the water flow continues for a total of 10 minutes. After the test, the device is removed, fully dried, and then checked for normal operation. Note: The water repellency of this device is tested by using a flow rate of 0.1 l/min per hole (the number of holes depends on the size of the swing tube), a water spray angle of ±180° and a pressure of 80~100 kPa; the device is rotated 90° horizontally after 5 minutes, and the water flow continues for a total of 10 minutes. After the test, the device is removed, fully dried, and then checked for normal operation. For more details please visit the official ASUS website
Comments
Post a Comment